Related Articles by Labels



Widget by Hoctro

Thursday, August 28, 2008

HP Placement paper 15th MAY 2007,FIEM

HP PAPER ON 15th MAY

hello everbody ...hope my questions will help

1.the paper was totally filled with c.
2.some programs were given and u are asked for the output.
3. give the o/p of the following programs>>>
a)main()
{ printf("%d",scanf("%d%d",printf,scanf));
}
1)2 2)2 2 3)0 4)error

b)there was a program of swaping by pointer(check it out)

c)main()
{char *p="quick";
char q[]="sort";
char *t;
t=malloc(sizeof(p)+sizeof(q)+1);
strcpy(t,p);
strcat(t,p);
}

1)quick sort 2)sort sort 3)quickqick 4)sort quick

d)main()
{ int s[]={1,2,3,4,5,6};
printf("%d",&a[0]-&a[5]);
}
1)error 2)8 3)6 4)0

e)try to know pointer and its various operation (say what will happen if 2 pointer is added or int pointer is addressed to a char etc.)
4.try to know something about firewall and its functions

best of luck

HP Placement Paper 6 June 2007 Orissa Engg. College, Bhubaneswar

HP PAPER ON 6th JUNE AT BHUBANESWAR

Hi! This is SOURAV SETHI..........4m Kharagpur.hp conducted t recruitment at our college on 6th june 2007.

The selection process is as follows:
1.Written
2.GD
3.Technical Interview
4.HR Interview

1.The written test was conducted by a consultancy. It consisted of:
1.Logical analysis(25 question):The questions were not hard some of them were very easy,particularly d venn diagram question.
2.Technical(30question ):The technical question were tough,the questions were mainly 4m C,C++,rdbms n digital electronics ckt(DEC)

There were sectional cut-off. 4m around 200 candidate only 63 cleared d written test.
2.Then there was d GD.The GD topics were very simple like
a.should there b uniform dress code in college?
b.love marriage or arrange marriage
c.mercy killing(this was d topic 4 our group)

b4 d GD, d HR will ask u 2 suggest any topic, try to give d topic in which u can b comfortable.
b4 the GD d HR clearly told us what he was looking for in a GD......1st fluency 2nd accent 3rd grammer
out of 63 candidate only 22 cleared the GD

3.The Technical Interview round:
In this round ur project is going to help u a lot.
the ?s that were asked 2 me-
Tell me abt ur project?
how can ur project helpful in software field?
questions abt computer like,what storage device in comp,draw d block diagram of computer?
why do u want to join s/w?
*make sure that while answering the questions be confident.
In this round apart 4m ur technical knowledge they r checking ur communication skills and ur way of delivering aswers.
here out of 22 candidate 11 were selected 4 d HR interview

4.HR Interview round:
It was a very easy round. here again they r concentrating on ur communication skill and ur confidence
the ?s r very easy......they asked me
Tell me something abt urself?
what social work u like to do?(as i have mentioned in my cv that i like doing social work)
Why do u do social work?
Why s/w?

Finally out of 11 candidate only 7 were selected. Luckily i was one of them. Best of luck freinds........Hope to c u in hp

HP Placement Paper 11 July 2007 Gitam, Visakhapatnam

HP PAPER ON 11th JULY AT VISAKHAPATNAM

Good evening friends........today we had hp company on campus to our college,GITAM....they allowed CSE, IT, ECE, EIE, EEE, MCA, and M-TECH students...first we had ppt on mornig section followed by written.

totally four rounds...
Written test
Group discussion
Technical round
Finally hr

in written test, there are two sections for both IT and non IT branches.....aptitude and technical,there will be two sets
In APTITUDE, they asked totally 25 questions for 30minutes....
some questions on venn diagrams(1,2,3,4)(little hard but can get it ), one question on ratio and proportion, ages, (4-5) questions on Data Sufficiency, 5 questions on binary decimals(very easy), speed and time one question, one problem on series(it is hard better leave it if you cant do it,but dont waste time), directions-1 question(very easy), blood relation 1-question (very easy),,............i remember this much only.......

try to complete in given time..............i dont the cut-off.......
Next is TECHNICAL, there are totally 30 questions in 40 minutes. i dont remember questions but.....for CSE and non CSE,the papar is different,dont worry, i am from EEE branch, and my paper was very easy,,,,,,,,,its all C pointers, matrices in arrays, structures, errors type questions,,,,, and from digital circuit design (using gates,,)etc
for CSE people they were asking many questions on all programming languages it seems,, C, C++, UNIX,dbms,etc.............
naerly 300 attended written 100 were short listed for GD round.......

GROUP DISCUSSION
our topic is : "SHOULD INDIANS ARE ALLOWED TO GO ABROARD"; i have speaken twice, i got a chance for less no. of times because i sat at corner........one more topic i got to know from my friends is " LIFE IN SPACE" .38 were cleared in GD

TECHNICAL ROUND
all are very friendly with us
my round came,i entered the room,
good evening sir,
he saw all my education details,he asked me why i have scored less in tenth class,i said ,sir i have started my studies from my tenth in a better way,he convinced with my answer....
be confident in what ever you say
he asked questions on c program(wap on factorial)
he asked for my favourite subject
i said electrical machines
he is basically from electronics so he could ask any questions from machines
then he asked questions from linear integrated circuits (LIC) and power electronics(SCR)
difference betweem diode and SCR
draw characteristics and diagram of both and difference between them........
few questions data structures(linear linked lists,doubly linked list,stacks, queues);
thats my technical round got selected and waited for HR

HR ROUND
good evening sir,
he introduced himself,he is also very friendly,cooperative with my answers
again same question.....why is your tenth marks are so less
are you feeling nervous..........no sir,i smiled
he said i think you are always smiling
i said yes sir,
what is your father & mother occupation
your brother doing
one suitation question,if your principal was given Rs.50000/- for your computer lab commence.......what will you first..............and if four more members were also given the same job what will you do
if you selected and appointed in bangalore how will you manage your time when you have stay atleast 30 km far from office
have you visited bangalore or chennai any time,,,,
will you find any difficulty in staying outside
will your parents agree for this
do ytou wanted to ask any questions on hp or else any thing
can you tell my weakness that you found now..he said i am weak in communication,and not focus on one particular area i.e. my thinking ability is not fixed
finally i was selected for hp......

so friends be cool and confident and make sure you were not seen as tensed way and dont show exprassions to them so that they may catch you out of 20 girls they selected 10 girls. i dont know the total selected number

ALL THE BEST
Madhuri

HP Placement Paper 13 July 2007 Panimalar College of Engg, Chennai

HP PAPER ON 13th JULY AT CHENNAI

Hai....friends,
here was one puzzle like there are 6 members in a family n they are teacher, student, engineer, lawyer, docter and housewife.
2 is mother of 3 who is a teacher
4 is Grand mother of 3 that is a house wife.
3 is sister of 1
6 is father of 1 that is doctor
and 5 is lawyer father of 6

Q1- who is student
Q2- who is engineer.
Q3- who is a girl in the family.
Q4 - sum of the no between 1 to 100 divisible by 2 and 5.
ans 550
Q5 - some question were from english series as which will be next
ADEHI .... and is LM
Q6- some were from probability.
as 2 dice are thrown and probabily of coming some more than 8.
some question were from reasoning....

and in last there was technical question from DS, VB and .Net as
1 - the size of text box.
2 - the size of msg box
3- what operator used to compare two string
4- DIM i,j means ... variant i,and variant j

Operating Systems
Study all the unix commands & some basic networking concepts like DHCP, Dynamic NAT, RARP, ARP, UDP, DNS. Unix : Grep, sed, basic perl program whose o/p is to be predicted. Pipes. You can expect some nasty & tricky questions !. But this section is kool not to worry too much

Section 2 : Programming part
C programs & Java programs. The programs seems to be easy but bcoz of the Negative marking (0.5) we have to be very clear. No bluffing ok! The programs are easy. Programs were on Fork, PID, Basic C syntax, Basics of Java, Exception handling, Inheritance, Strings, Cast conversion, Object linking etc

Section 3 : Aptitude
Most of the questions can be found from other placement papers like Sonata, TCS, Caritor. Nothing to worry much. But again you have to be very confident about the answers.

Bye dear thanks alot and all the best..
G. Karthi

Honeywell Placement Paper ON 7th APRIL

Hi friends, I am ECE student. i have attented honeywell written test on madurai. so, i give some information to you. it consists of 4 section.
1.Technical 50
2.C 30 These 100 takes 100 min(1h 40min)
3.Aptitude 20
4.discriptive 20marks(tech& program on C)


1.TECH:
SUBJECT------electronic circuits& devices(find o/p) LIC,digital electronics, contro system,dsp, microproesser&controller,analog&digital comm.
2.C:
AREA---------pointer**,funtion**,union,sturture,files,memory management.
FROM EXPLORING C

3.APTITUDE:
TOPIC--------profit&loss**,numders,area,interest,distance,train,odd man.
VERY EASY FROM r.s AGGARWAL

MOST ASKED FROM THIS AREA.

4.DISCRIPTIVE:
TECH AREA---------CIRCUIT DRAWING(he give i/p & o/p for us---i/p==230v&50Hz, o/p==12v&0Hz ) diode operation,use of ALE in Up,likewise for 10 marks

PROGRAMMING-------There is a CHOICE to take C ,CPP ,JAVA ,.NET C ? ----Eg:he give summary for program then U write progam Like without using SCANF & PRINTF statements

IF YOU HAVE GOOD SKILL IN THIS SUBJECT, YOU EASILY CLEAR YOUR WRITTEN TEST.

2 ROUND
TECHNICAL INTERVIEW
1.YOUR DEPARTMENT TECH ?
2.YOUR'S ABLITY IN C & CP

3 ROUND
HR INTERVIEW

ALL THE BEST FRIENDS WORK HARD****WIN EASY
Murugaiyan raj

Honeywell Placement Paper ON 7th APRIL

HONEYWELL PAPER ON 7th APRIL

I attended the HONEYWELL written test on 7th April 2007 at . The selection proceture has 4 rounds.

1st round-----------> written test
2nd round----------> tech interview
3rdd round----------> tech interview
4th round----------> HR interview

1st round
In first round they separate the whole candidates as two screams namely electronics stream and IT stream. we have separate paper according to our stream. I'm a EEE student so I come under electronics stream.

Ist round contains two types of paper
1) objective type
2) descriptive type

Objective type:
It contains 100 objective type questions.
50 tech [ Electronics, DSP, Control Systems, Digital Sysrems, Micro processor, LIC and etc,]
30 C[structure, Array, pointer, data types, functions ]
20 aptitude[very eay R.S Agarval enough]
all in 100 minutes. 25% negative marking for each wrong answer.

Descriptive type:
It has two section
1) tech part [Electronics, DSP, Control Systems, Digital Sysrems, Micro processor, LIC and etc]---> 10 mark
2) Programming part [ u've a option to choose C, C++, JAVA, .NET] ------->10 mark
All in 20 minutes

2nd round.
I attuned it for about 1 hour.
all questions from basics from your dept [ Electronics, DSP, Control Systems, Digital Sysrems, Micro processor, LIC and etc,] and C, and maily your project. Focus on your RESUME. That's ver very important.

3rd round
I attended it for about 45 minutes, some what depth in your dept. and C. They(2 pannel) asked me about past interview experience in this round.

4th round
This is HR round. It was very easy. It contains genral questions like what's ur strength?, what your frinds think about u?, ur achivements and etc... I attended the 2nd, 3rd, and 4th rounds in HONEYWELL TECH SOLLUTIONS, MADURAI.

I've been selected in HONEYWELL. The result was announced on May 14th, 2007 thro mobile.

ALL THE BEST
Ponkarthikeyan

Honeywell Placement Paper ON 20th APRIL AT KOLKATA

HONEYWELL PAPER ON 20th APRIL AT KOLKATA

Hi I am Subhrojit Chowdhury from G.N.I.T. Kolkata Recently I have been placed in Honeywell Automation India Limited.I would like to share my experience with you guys.

Selection Process
1>Written Test.
2>Technical Interview.
3>H R Interview.

Written Test
It consisted of 2 parts General Maths,General English.....Almost 1500 students appeared for the test and 43 students cleared the aptitude test.After that we had our technical round 21 cleared the round.At last 14 of us cleared the H R round.

Written Test(30 questions)
1>R.S Agarwal Will do The job.
simple percentage,profit and loss,work and wages etc

General English(15 questions)
1>Consult GRE Barrons.
Synonyms,antonyms,Paragraph

Best of luck guys,
Subhrojit Chowdhury

Hello Soft Placement Paper

Sample Question Paper

What is diners phylosophers algorithm.
What is atomicity.Explain
Give an example of source- level debugger in unix/linx.
What is Pre-emptive multitasking.
Do not remember this one.
DataStructures: (ONly 5 Questions)

Where will the parameters be stored when a function is called in a program.
What is recursion?What are its disadvantages.
Which one is the best and efficient sort?
Networking:(Only 5 Questions)

ASN.1 belongs to which layer.
Give an example of popular Transport Layer Protocol
What is the netmask of Class B IP address?
Explain CSMA/CD.
Given a size from 0-7 what would be the least window size.
C Language (Total 13 Questions)

main()
{
printf("%d",printf("HelloSoft"));
} Output?
case 1: case 2:
typedef Struct { typedef Struct {
int a; char p;
char b; int q;
int d; char k;
char e; int l;
}A; }A;
Assuming 'packing' is not enabled, which case will give an error of Sizeof(A) less.
main()
{
int i=3;
printf("%d %d %d",i++,i,++i);
}
main()
{
int i=10;
int j,k=5;
int a[10];
for(j=0;j<10;j++)
a[j]=(i+k)+(i*k);
}
Optimize the above code.
Write In Order Tree Traversal Pseudo-code.
main()
{
int *p=0x100;
int *q=0x100;
int k=p*q;
printf("%x\n",k);
} Output ?
Char* foo(Str...) {
char str[4];
strcpy(str,"HelloSoft");
return str;
} Output?
int a[10][20][30][40];
int *p
How to access an element of a using p?
main()
{
int i=10;
if(i>20)
if(i==10)
print("Hi");
else
printf("Bye");
} Output ?
main()
{
float f;
int i;
//something like this not remember these 4 questionsexactly
f=(float *)malloc(sizeof((float *)*4));
}
Some Question was asked not remenber .

Hexaware Placement Paper ON 8th NOVEMBER AT CHENNAI

HEXAWARE PAPER ON 8th NOVEMBER AT CHENNAI

Hai friends, Iam uday kumar.k.Iam studying IVEEE in MITS, MADANAPALLE.

I attended for the recruitment process of HEXAWARE Tech,Chennai.on 8&9 of nov.,2006.
the test pattern is having three rounds.
->written test
->G.D
->Tech/HR interview
In our college they held an off campus,in that 480 members were take part in written test.
Out of them 141 members are short listed for the group disscussion.
Written is not easy n as well as not difficult.100 questions are given n u have 2 ans in 1 hr.The written test ques paper is different for IT n NON IT
students.I,being non it student,Ican advice for non it students. Other 2 rounds are same n out of breanch.
Written test consists of three categories.
1)ENGLISH
In this section u have again four parts,spelling correction,paragraph forming,synonims n antonims.
GARNIR
CRUED
GLAANSE
EXERSISE
CAPSION
these r only examples but u will get the hard ones than u prepare. the second one is paragraph forming.

In this part u will given first n last sentences n choice for middle four sentences. i.e
options r in jumbled form u have to choose the right jumble. Be thorough it's easy.

The other parts are synonims and antonims.These are highly difficult some words u may not heard
atleast once in ur lifetime. Uhave to chose the best word from the options given.
VERIZON
PROFFESSIONAL
AGREE
DISCARD
CRUNCH
TARGET
INSTERT
BRAKE etc..

2)General aptitude. this have the simple aptitude problems.
>>problem on percentages
>>problem on profit&loss
>>problem on discounts
>>problem on time & distance
>>problem on time n work
>>problem on numbers
for us no series r oddman out were given but u be through with them.

3)Technical: This is the hot point of the test paper such thet all ur intermediate and B.tech
talent have to be used here.
>>If a chip having 8 bit address line what's it meomory? (simple 2^8= 4KB)
>>what is the alternative equipment for ac voltage controller(TRIAC)
>>Some problems on control systems such as find the poles n zeros for given T.F
(s+2)s/(s-2)(s^2+7)+25
>>Basics of electricalEngg i.e electric machines and power systems
>>Basics of electronics i.e DSP,EDC and micro processors.

After completion of written test u have most easy,dangerous and best eliminating round G.D.
They allot 12 members for each gooup.Topic may give themsealves r thyey ask u to chose the topic for ur self.
It's depend on ur Observer.If they issue the topic, its well n good.Else u chose the topic in the current affairs.
The best for G.D are
>> avoiding copy in educational institutions
>>globalisation
>>global warming
>>need for MBA
>>love marriage n arranged marriage
>>effect of movies on youth
Dont miss the chance to initialise the topic. Dont watch the observer there is a chane to get
him as ur interviewer.so be cool n talk effectively whatever the points u have.Be a best listner.
Advice the members who r idle to talk n give a chance to them. This shows ur leadership quqlities.
I got the topic effect of movies on youth I initialised n concluded the topic. I suggested the movies r necessary for youth.
I rised the points on technology development, dresscode and livind insociety etc..
If u want to initialise dont adict for a single point dissciss both advs and disadvs of the topic.Maintain eye contact with the
speaker it's importent.

In our college,141 members are attended G.D. but only 26 members are short listed for the interview process.
All this is done on 8th nov.,2006.On next day interviews are conducted.
Be prepare for both technical and HR interview.Remember ur written test code and number,he may ask.
In the interview process he may give the ques to write a progam for desired one,or he can give a set if ques on ur B.Tech basics
i.e micro processors, control systems,network theory etc..
Out of 26 members, I was around 14th member called.
At first he was uotside of the cabin and asked me to go n sit in d cabin.After some time he came back and said
Hi to me I just stand from my chair and wished him good morning. He asked me for my application and resume.
He started his claw of questions witha simple one tell me about ur self. Be prepare for this question it gives u all ur inf'n abt u
and the confidance level also. In my resume I added an extra proffessiona coursce called MCSE-2003 on LAN networking.
He asked me various ques on that only. such as differences between PDC/BDC,trusted domain and trusting domaim,DNS,IP etc..
I answered all the questions except one.After a long peroid of these session,he asked me"any ques'ns?"
I asked him about the profile of the job. he explained and gave me shake hand. I replied with confidence.

After 3 hr.s they checked in all criterions i.e written, G.D n interview considering the best marks in each field. and announced the results.
I was shocked that only 4 members were selected in those Iam the one. Thank God.
Last but not least believe in god be prepare well. dont neglect ur B.Tech basics any time.Meet u in HEXAWARE.
ALL THE BEST.
By,
Uday Kumar.

Hexaware Placement Paper ON 12th NOVEMBER AT CHANDIGARH

HEXAWARE PAPER ON 11th DECEMBER AT CHENNAI

Hi Friends,

I got selected in hexaware technologies on dec 11th...
Their selection procedure consists of 3 rounds
1.Aptitude
2.GD
3.Technical and HR

1.Aptitude
The Aptitude round consisted of 100 questions and you are given 60 minutes time... The aptitude round consisted 25 verbal q's, 25 Maths q's and 50 tecnical q's... Time will not be enough to complete the paper start with verbal and move to technical and at last do the maths... The cut off is only 30 so there will not be any problem in clearing it... But the paper will be very difficult... The technical aptitude questions is different for IT and Non IT stream...

60 attended the aptitude and 30 cleared it...

2.GD
The GD is very simple... You are given 2 minutes time to choose the topic of your own and then immediately start the discussion... We were divided into group of 10... Choose simple topics... The topics of our 3 groups were
1. arranged marriage vs love marriage
2.Cell phone boon or bane
3.Co education good or bad
The important thing GD is dont fight like a debate... Be loud and clear... Dont ever see the HR person sitting there... Discuss among your members... Dont switch from advantage to disadvantage... Speak out valuable points... These are more than important to clear the GD...

Out of the 30 who cleared the aptitude 14 were selected for the technical and HR round...

3.Technical and HR
This is the major round of filtering... You should be very strong in technical... The resume should be perfect... They find out many mistakes in it... My technical interview lasted for nearly 45 minutes... there were two persons out of which only one asked me the questions... Some of the questions were Marquee, vlink, alink in HTML... Some unix commands... Client server tecnology... Wat is Web Client... Applet, AWT difference between them... Told me to write Stack and Linked list program in C... Why is the #include used in c... Who founded the internet and how was it founded... What is OS...Few HR questions and some more tecnical questions... At last he wished me good luck...

Out of the 14 who cleared the aptitude only 2 were selected and to my surprise i was one among the two... I thank the almighty for this...

Be confident... Prepare more for technical... There is no need for preparation for the other two rounds... This is enough to clear... I wish u all the best friends...
Regards,
Anitha

Hexaware Placement Paper ON 11th DECEMBER AT CHENNAI

HEXAWARE PAPER ON 11th DECEMBER AT CHENNAI

Hi Friends,

I got selected in hexaware technologies on dec 11th...
Their selection procedure consists of 3 rounds
1.Aptitude
2.GD
3.Technical and HR

1.Aptitude
The Aptitude round consisted of 100 questions and you are given 60 minutes time... The aptitude round consisted 25 verbal q's, 25 Maths q's and 50 tecnical q's... Time will not be enough to complete the paper start with verbal and move to technical and at last do the maths... The cut off is only 30 so there will not be any problem in clearing it... But the paper will be very difficult... The technical aptitude questions is different for IT and Non IT stream...

60 attended the aptitude and 30 cleared it...

2.GD
The GD is very simple... You are given 2 minutes time to choose the topic of your own and then immediately start the discussion... We were divided into group of 10... Choose simple topics... The topics of our 3 groups were
1. arranged marriage vs love marriage
2.Cell phone boon or bane
3.Co education good or bad
The important thing GD is dont fight like a debate... Be loud and clear... Dont ever see the HR person sitting there... Discuss among your members... Dont switch from advantage to disadvantage... Speak out valuable points... These are more than important to clear the GD...

Out of the 30 who cleared the aptitude 14 were selected for the technical and HR round...

3.Technical and HR
This is the major round of filtering... You should be very strong in technical... The resume should be perfect... They find out many mistakes in it... My technical interview lasted for nearly 45 minutes... there were two persons out of which only one asked me the questions... Some of the questions were Marquee, vlink, alink in HTML... Some unix commands... Client server tecnology... Wat is Web Client... Applet, AWT difference between them... Told me to write Stack and Linked list program in C... Why is the #include used in c... Who founded the internet and how was it founded... What is OS...Few HR questions and some more tecnical questions... At last he wished me good luck...

Out of the 14 who cleared the aptitude only 2 were selected and to my surprise i was one among the two... I thank the almighty for this...

Be confident... Prepare more for technical... There is no need for preparation for the other two rounds... This is enough to clear... I wish u all the best friends...
Regards,
Anitha

Hexaware Placement Paper ON 27th FEBRUARY AT SCSVMV UNIVERSITY

HEXAWARE PAPER ON 27th FEBRUARY AT SCSVMV UNIVERSITY

Hi Friends,

HEXAWARE TECH.’s On-Campus interview for pre-final years at SCSVMV University on 27th Feb ‘07.
SELECTION PROCEDURE:
1) Written Test - 100 questions - 100 marks - 1 Hour
2) Group Discussion.
3) Technical Interview.
4) HR Interview. (TECH + HR in my case...)

DETAILS OF THE TEST:
Exam duration: 1 Hour.
Total Questions: 100
Total Marks: 100
Each question carries 1 mark… no negative marking…
Speculated CUT-OFF range- 35 and above
Written test results were announced within 45 minutes.
GD results were announced within 2 minutes.

TEST PATTERN:
Synonyms n antonyms- 10 questions.
Find the misspelled words - 5 questions.
Fill in the blanks with appropriate words - 5 questions.
Quantitative Aptitude - 40 Questions.
Technical section- 40 Questions (Separate questions in this section for IT (CSE and IT) and Non-IT (EEE, ECE) guys).
Go through any dumb quantitative aptitude text book like R.S. AGGARWAL … but… some questions require thinking of a different kind…

The strategy should be some thing like this…
If you’re comfortable with Q.A section… go for it right away.. There’s no point in loosing opportunity to gain marks to sitters out there waiting for your mercy!!. .. And if you didn’t pump in the usual amount of preparation for the exam... Go for the technical section….remember… ECE and EEE dudes have the same question paper!

Majority of the questions that I came across were related to… Control Systems… Digital electronics… Electrical Machines… go through all the damn basics from these topics…
And… well… the English part… ALL PEOPLE PRAY THY LORD… BARRON’S - HOW TO PREP. FOR GRE.

Easily you can answer 40 - 50 questions within 30 minutes… THIS IS A FIGURE INDICATIVE OF THE ANSWERS THAT ARE DEEMED CORRECT BY THY LORD… and… don’t leave your answer sheet blank … as far as there is no negative marking… you can always fill up those empty answer bubbles…

GD Topics:
1. Should parent’s n teachers be instructive towards their wards post adolescence?... in simple terms… Should parents prove themselves a pesky lot for their children.. Even after they reach 18 years?

2. Arranged Marriages Vs Love Marriages... (Never... ever think about saying somethin like.. Loving your mate after getting married and… stuff like that!!)

3. What should India do to win a gold medal in the Olympics?.

The GD topics are really intuitive… and entirely based upon the mentor standing over. He gives you one minute flat to decide a topic of your choice among yourselves... And if you don’t end up with something... He might go for very general topics like the ones above…
Preparation for GD… should be something like this…

Take up the recent editions of FRONTLINE… I recommend no other magazine than this…If you can afford it… subscribe it... Get the facts over hot n Boiling issues the world over such as… Murder trail of saddam hussain… Russian oil prices issue… Israel- Palestine Conflict… Indo- Pak scenario through the decades… Is china a tough competitor to India over the IT Highway?... Brain Drain and Brain Train… Why the hell is America playin with the lives of oil soaked countries… and… Bombay Serial bombings… Godhra incident…. Anything… read the editorial section of The Hindu daily… you’ll have real time inferences at your hand.

Overview of GD:
My GD topic is “Should parent’s n teachers be instructive towards their wards post adolescence??”
My Batch consisted of 13 members. The initiation was damned to hell… you get it right and flowing.. You’ve done your job 50%. Ma GD section was like this… (1 min-choose the topic, 2min-prepare the topic, 20min-shout like hell)So.. Here r my rules…

Nobody gives you a chance to speak up.. Its your right to get noticed. . Don’t wait for your chance - Grab it, carry a loudspeaker if possible.

Have a firm but relaxed sitting posture... Lean slightly forward… don’t play with a pen or pencil… you’ll be noticed from head to toe… remember!

Never ever make unruly gestures. You are out immediately!!

Remember… QUALITY > QUANTITY in GD’s. Speak up in a very firm tone… the authority in your voice should command that you’re a leader from hell!

If the situation degrades to a shouting match... Shout at the top of your voice… otherwise you may not be noticed by others.

Get ready to summarize. 2 or 3 chosen people will summarize the whole discussion. Try to say all the points and speak out the appropriate conclusion.

So… even if you talk less...but can manage somehow to put forward six to seven QUALITY (Don’t you talk crap... mike!) points into the discussion.. You’re in. Mail me if you didn’t make it... I’m your last hope!!

I delivered all these at the right instance… and... I’m one of the lucky 4 guys outta my batch heading for the HR.

HR
Right after the GD, we had a one hour break after which we had an excruciating spell waiting for our turn to come up. I geared up myself, imagining all the possible situation that I could possibly fall into.. I had this nausea coming up from the bottom, as people were coming out of the interview halls either with delighted or.. Sloppy faces.

My turn now..
HR: You have good grades at your +2 and UnderGrad..Tell me about yourself giridhar
Me:Blah blah blah... for five good minutes
I had intermittent questions as i was blurting ma answer out... can’t remember each too well.
Gyan:Never initiate this answer with something like. I’ve had my schooling at this school...at that college... undergrad at this college.. ma marks are... stop yelling out the crap thats already with him in your CV and.. tell him who you are... how is your environment... your ethical and moral values.. how you achieve our goals... this deadly question needs at least a days preparation... get it right and gear up for the next question

HR: What are your negatives giridhar?
Gyan:This question reflects your attitude towards yourself. I think the negative aspect of yours should not be a cost to the company( “your negative should be a positive one to the company”). Be very careful in answering this question. “perfectionism” might be a good example... you are a perfectionist.. but it makes you feel kinda restless...but it is an assent to your company.

HR: What do you know about this company
Gyan:This question is mainly asked to test about your ability to do homework. (not the homework we do in our schools). It is knowing beforehand about the company . You gotta studyout some intricate and important details such as the company’s stock value... it’s expertise in parallels.. company locations..etc.,You don’t need to know in and out about the company but still, the more you know, the better are your chances. Go through the company website completely and run a search in google.

HR:Tell me about your mini-project.
Gyan: This is used to test your ability of selling. That is, your ability to explain something. Be sure footed about your project. The technical questions may sometimes start from this question. They kicked them off with this question

HR: What are our favourite subjects?
ME: Electrical Machines and Power Electronics.
He then started off with questions , very basic ones initially and then digged deep into the subject .Questions i remember
“What kinda motors are used in trains and trams”
Ans: Series and compound motors

“Draw the phasor diagrams of all the electrical machines you know”
Ans: Confessed that i remember none... could draw diags of R, L and C combination circuits. Got myself bombarded with questions from power electronics (My Mini Project)

HR: What languages are you comfortable with??...
ME: C++
Questions: WAP to generate fibonacci series
Swapping of numbers using call b ref. And call by value (Only logic.. cut out the printf... scanf kinda crap).
That’s it guys! These are all I can remember. Again I have covered most part and any other questions will be similar. So extrapolate what I have given here and prepare accordingly.

Last thing; please live up to your Resume. Do not think of putting something that you don’t know about or know just ‘something’ about. Highlight the words which you are completely confident of. When seeing your resume, the interviewer must be able to get knowledge of who you are by just giving a glance. So highlight your GPA if it is high and skills which you know in and out.
Your resume need not be 3 or 4 pages long to tell you are a learned person. The contrary holds good in the real life. The shorter and ‘sweeter’ the resume is the better are your chances. 2 pages is good enough.

Face the interviewers with a positive frame of mind. Think that you can do it. what is in your mind, either the positive or negative mindset just reflects in your face, eyes and in your words.

All the best. See You @ Hexaware.
Giridhar

Hexaware Placement Paper ON 10th APRIL AT BHUBANESWAR

HEXAWARE PAPER ON 10th APRIL AT BHUBANESWAR



Hye everyone... I attended the hexaware recruitment.....



The recruitment precodure consists of 3 rounds

1.WRITTEN TEST (APTITUTE,ENGLISH,TECHNICAL)

2.GD.

3.TECHNICAL INTERVIEW.



WRITTEN TEST was little difficult n lengthy also.It consist of 3sections-english,mathematics n at last techical paper which is little tuff than the other two sections.

I am a non-IT student so for us technical paper was not from C/C++ , it was electronics core type paper.So you must be perfect in ur branch papers like DEC,Power Electronics,Control System,Electrical Machines,Microprocessor etc.


Hexaware's written test was little difficult n i personally believe that it was difficult but i cleared the written test.And some of my very close friends of my branch found the paper very easy,they helped us n cleared handsomly.



OUT OF 320 STUDENTS 116 STUDENTS WERE CALLED UP FOR THE GD NEXT DAY.

MY GD TOPIC WAS----

"WHO WILL BE THE NEXT PRESIDENT OF INDIA "

SOME OTHER TOPICS LIKE "HOW SHOULD COPYING IN EXAM BE STOPPED"

"SOFTWARE COMPANIES DEVELOPING IN ORISSA"

" INDIA AS A SUPER POWER"



SO OUT OF 116 STUDENTS 34 CLEARED THE GD N FORTUNATELY I WAS THERE IN THT 34.THN SUDDENLY WE WERE CALLED FOR THE TECH INTERVIEW.



I WANT TO SHARE SOME QUESTIONS WHICH I WAS ASKED IN THE TECHNICAL INTERVIEW

WHICH MAY HELP YOU IN FUTURE....

>> I ENTERED THE ROOM-WISHED HIM.

>> HE SAID TAKE UR SIT.

>> I-THANK U SIR

>> THN HE ASKED DIRECTLY IN SUBJECT U HAVE SPECILAIZATION

>> I SAID MICRPROCESSER 8085

>> THEN HE ASKED TEL ME WITH HOW MANY VOLTAGE DOES MICROPROCESSOR WORKS?? ans is 5v.

>> I REPLIED CORRECTLY.

>> THEN HE ASKED 5v A.C. OR D.C.VOLTAGE?? ans is dc.

>> THEN HE ASKED HOW MANY PINS DOES 8085 MICROPROCESSOR HAS??

>> THEN HE TOLD ME TO WRITE A PROGRAM(MULTIPLY TWO NUMBERS)IN 8085.

>> I WROTE CORRECTLY.

>> THEN TOLD ME WRITE ANOTHER C PROGRAM.

>> I WROTE IT CORRECTLY N ALSO EXPLAINED THE BOTH PROGRAMS.

>> THEN HE ASKED ABOUT SOME INSTURUCTIONS SET IN 8085.

>> I REPLIED.

>> THEN HE ASKED ME ABOUT MY NAME.

>> I REPLIED.

>> THN HE SAID OK THANK YOU-I SAID THANK YOU SIR MY PLEASURE.



I ANWSERED ALL CORRECTLY BUT MADE ONE SIMPLE WRONG. BUT I WAS CONFIDENT N HAPPY HOW MY INTERVIEW WENT N HOPING FOR THE RESULTS.....

AFTER 1HR RESULTS DECLARED OUT OF 34 SIX GOT SELECTED.AND MY NAME WAS NOT THERE IN THT SIX.THT MOMENT WAS VERY PAINFUL FOR ME.BUT THEN I REALISED I WAS OUT BECOZ OF THT ONE MISTAKE,I ANSWERED AL CORRECTLY EXCEPT ONE.ONE OF MY GUD FRD GOT SELECTED.



OK GUYS THIS WAS MY EXPERIENCE WHICH I WNT TO SHARE WIT U N MAY HELP U IN FUTURE. OK BYE GUYS.



ALL THE BEST.
Sakthi

Hexaware Placement Paper ON 19th APRIL B.I T. Durg

HEXAWARE PAPER ON 19th APRIL



Hi Everyone This is Abhishek Tiwari From S.S.C.E.T Bhilai. I attended the Hexaware recruitment.....on 19th April in B.I.T Durg. Around 400 students attended the recruitment test and finally 28 were selected .I was one of them

The recruitment procedure consists of 3 rounds

1. WRITTEN TEST (APTITUTE, ENGLISH, TECHNICAL)

2. GD.

3. INTERVIEW.



1. Aptitude

The Aptitude round consisted of 100 questions and you are given 60 minutes time... The aptitude round consisted 25 verbal q's, 25 Maths q's and 50 technical q's... Time will not be enough to complete the paper start with verbal and move to technical and at last do the maths... The technical aptitude questions are different for IT and Non IT stream...


The few technical questions I remember are

1. Which of following dissipates least power?

a.TTL

b.ECL

c.RTL

d.CMOS [ans]



2. What is the laplace transform of unit impulse function?

Ans.1/s.



3. The resistor is given voltage V=150 sint .what is the power dissipated?



4. How to find the value of Z in theveins theorm ?

Ans sc voltage source and oc current source.



5. If in addition of excess-3 code the sum exceeds 9 then what we hav to do?

Ans subtract it by 0011



6. A signal is modulated having modulation index 3 and 4 .what will be resultant M.I

Ans 5[srt of m1+m2]



7. IC timer 555 can be used as?

a. astable mv

b. monostable mv

c .freq divider

d. all[ans]



8. Give the contents of SP & HL pair after the execution of following statements

1002 LXI SP, 27FFH

1003 CALL 1006H

1006 PUSH H

Ans SP=27FFH HL=1006H

9. Phase margin of system is 125 what is its gain margin?

Ans -125 [not sure]



10. If the gate voltage is increased the n what will be the effect In MOSFET?

Ans Channel widens.



11. Current in the rotor of 3 phase induction motor is due to?

Ans Induction.



12. Question on transmission line with values of Zoc and Zsc given.Find the value of Zch?

Ans Zch =sqrt[ZocXZsc].



13. White noise has?

Ans Flat power spectral density.



14. The Transfer function of the system was given .find the no. of breakaway pts?



15. If a function has half wave symmetry its Fourier transform consist of?

A. only odd harmonics

B. only even harmonics

C. Both even & odd harmonics but no constant term



Some questions were from digital communication, digital electronics all questions were basic.



The aptitude questions were repeated from previous papers. Few of them are

1. Let ax2 + bx + c = 0

If the sum of the equal roots is equal to the product of the same roots. Then which of the following hold true

Ans. b+c = 0

2. A person's salary is getting reduced by 20%. What percentage should be added to get back his

original salary?

Ans. 25%

3. In a rectangle the length is increased by of the original length. By what proportion should the

width be reduced so that the area will be the same?

Ans. 33

4. Find the nth number in the series is 1, -3, 5, -7.___

Ans. (-1) ^ (n-1)*(2n-1)

5. If a square is formed by the diagonal of the square as an edge, what is the ratio between the area?

Ans. 2

6. 12. In the series 0, 3, 8, 15,__ What is the next number?

Ans 24

7. find odd member out?

A .IBM B.DELL C.COMPAQ D.MOTOROLA

A. SQL server B. Sybase C.ORACLE D.UNIX

A. B B. C C. F D. I



Few Questions from a passage ,to find the synonyms and antonyms of the BOLD words

Few Questions to correct the sentence given



Out of 400 students appeared 133 cleared the written exam



2. GD.

We were divided in 13 groups each of 10 students

The few topic given were

· Performance of Indian cricket Team in 2007 WC

· Should Women be inducted in Indian Army?

· A plane has been hijacked by the terrorist, now u have to decide weather to take military action or to negotiate with them. Discuss…….

My topic was women’s reservation should be forced in IT industry



They check your communication skills and level of understanding and general awareness .If possible interact with ur group before the GD & try not to make A fish market in the GD



Out of 133 students 48 got through GD



3. INTERVIEW.

It was a general interview .Few students were asked basic questions related to their branch. Some students had purely HR interview. Mine was completely HR interview with few questions on C Be thorough with your resume .Try to give Specific examples for questions related to ur resume .Listen carefully the PPT & prepare ans. accordingly .

Out of 48 students 28 were finally selected and I was one of those lucky 28

Hope to see u in Hexaware in near future. Best of luck………………………

Tuesday, August 26, 2008

HCL Placement Paper 9th JULY AT CHENNAI

HCL PAPER ON 9th JULY AT CHENNAI

Hi frnds SANKAR here from st.joseph’s coll of engg…..hcl came to our coll for campus recrutmnt on 9th july. I like to thanks fresher world from were I got all the information’s needed for me…..!

Hcl consists of 2 round

· General aptitude. + Technical.

· H.R round.

First to aptitude….

it seems hcl changes pattern for every coll…as they wish, For us it was a Online test…..80 general questions 60 mins



Its very easy any student can crack it……it consisted of 4 sections

Each 15mins…..its not verbal n not quants its some thing different….!

Consisted of Data interpretation, match the correct grammar n match the correct. Data interpretation was very easy it is not maths. Grammar its generally making spelling, commas, corrections in the given test. Its generally Eye checking test…..u will have to find small mistakes in it…..u will have to c every word n sentence properly…..

Eg:- consultant, consultant, consultant etc….

Like this only it will b very easy…..



Match the correct…..
2 statements will b given u have to check weather both matches r not…..its too very easy…..
Eg:- alexraja@gmail.com
alexrraja@gmail.com.
#^*4454834969966996
#^*4454834966966996.

Any one with good eye sight can crack this easily….only one is every thing would look similar u identify the wrong one….!

About Online test first thing is tat u have to ans the question tat comes on the screen if u skip it u cannot b able to go back n review the questns once answered is answered u cannot change it when u go from that page….n in 4 sections they will a lot 15mins for 20 questns…do as much fast as u can……



Technical:-
Its fully “C”

It’s the toughest part in the test….

Any one with good basic knowledge can crack it…..

Be through in all the concepts….espl

Structures

Pointers

Expressions



You would have to correct the error in the given code…..like What will u do to correct this linking error…runtime error…etc. So well prepare in c concepts…..!! In my college, 350+ wrote the exam n 148 cleared it…..! They announced the result 3hrs later….at 6.30pm.



Next the H.R round:
This is a rejection round u shod b very careful in attending this for me my H.R was so sweet…….

So I was able to speak properly they generally check ur communication skills n confidence the way u behave they could judge u frm the way u sit b4 them……!!! So don’t be arrogant don’t argue with him don’t contradict Wat they say…..be polite tats enough.



I attended the interview at 9.30pm they announced the result 2 days l8r only…..only 45 were selected out of 148.

Thank god, I am one among them…! Pray to god he will help you…..!



With regards,
Sankar.

HCL Placement Paper 25th JULY AT COIMBATORE

HCL INTERVIEW ON 25th JULY AT COIMBATORE

Hi friends..me wanted to share the interview experiance with HCL. first v had aptitude test

1) General apti test
2) Technical paper( asked in computer networks, unix and c)
and a harware technical paper for those who are interested in that. i wrote only for software test..

Those who r shortlisted in aptitude test are called for the interview on the next day.

We had two rounds of Interview 1) Technical 2)H.R

Technical:
only one interviewer in the panel..i m an ECE student and my area of interest in microprocessor 8085. so following questions are asked for me..
1) Introduce yourself
2)Tell me about your projects done so far
3)What s a pointer and write a program to print the address of that variable.
4)How to access a pointer using structure and write a program using that
5)What s the difference between structure and union
6)Write a program using union
7)What are the advantages of pointer
8)Whats a static variable
9)What s a micro controller and the difference between microprocessor and microcontroller
10)Tell me the major advantages of microcontroller compared to microprocessor

HR Interview: female HR came to our panel.. she asked the questions so fastly and didnt wait to answer the questions fully. .I didnt expect that she ll ask technical questions in HR interview.. so BE READY FOR ANYTHING

She gave a c program and asked the output, then asked whats a pointer
1)What s ur aspiration? 2) Why HCL and wat do u know about HCL? 3) About family background...

Then within 30 minutes they announced the result.. I m selected in HCL finally..
ALL THE BEST TO ALL
G.D. Suganya

HCL Placement Paper 4 August 2007 MSIT, New Delhi

Hi Friends…

I m Sarandeep. Rite now m pursuing my B.tech from GTBIT (GGSIPU) in ECE (4th yr). The HCL tech written paper was held on 4th August, 2007 at MSIT, Delhi and Interview was held on 24th August..



There was 1 written paper and HR Interview.





WRITTEN PAPER.



1Aptitude (Common to all)



There were total 60 questions.

No negative marking.

Time Limit: 50 mins



Ques on Bar chart, Reading Comprehension, Data Interpretation, Q.A , Data Sufficiency/Insufficiency, Puzzle Test, Basic computing knowledge, Flow charts, Microprocessor etc….



2Technical Paper (For CS/IT)



There were total 25 questions

Time Limit: 20 mins

Ques on C, C++, DBMS and Data structures.





3HR INTERVIEW



Basic HR ques that were asked:-

1.) Your Introduction?

2.) Your objective?

3.) Tell me something about your family? (This is their favorite question so prepare it well)

4.) Why HCL?

5.) If you are already placed in another company, then why HCL over that company?

6.) What do u know about HCL?.(www.hcltech.com and PPT)

7.) Incidents in support of all that u have mentioned in C.V? (V.imp)

8.) How are you different than other candidates? Why should we recruit you?

9.) What’s unique about you?

10.)Any plans for higher studies? (Big No!!!!)

11.) Any Problem in Relocation? (Strict no no.).

12.)Your Hobbies, Interests, Strengths and Weaknesses, some other ques from C.V.

13.) One thing that irritates you the most and why?

14.) You may need to explain your projects also.

15.) Do you want to ask something from me? (Prepare a good question as not asking any question shows serious disinterest towards company, plz don’t ask that’s already told in the presentation. You can also say that “I m fully satisfied with the presentation”)



FINALLY, the statistics.

Around 250 students gave the Paper.

Around 150 cleared the written.

And finally, around 80 were selected.

And by the grace of God, I got selected.



All the best, Prepare well….

See u at HCL Tech…

Sarandeep Singh.

HCL Placement Paper 5 September 2007 MADURAI KAMARAJ UNIVERSITY

HCL QUESTION PATTERN 2007(MADURAI KAMARAJ UNIVERSITY)

Hcl had visited in our campus at 5th sep 2007 so they had given the following Question pattern

It consist of 2 part.

In first part they had given 60 Aptitude ques and time duration for that was 45 min

In the second section it was fully Technical part, in that part 20 ques consist 4m C Apit only and the time duration for that was 15 min

NO Negative marking for any part .

In the first part consist of 4 section, every section had 15 ques

First section-Analogy-5,G.P series- 2,(+,-*,/) 4 ques on this basis it was some wat difficult e.g -2*3+4-5=14 and 4 option for that (i)+,- (ii)+,/ (iii)*,/ (iv)/,+

And the last 4 question which one is similar for that series

e.g- 64,125,216,343

(i)500(ii)600)(iii)512(iv)612

Second section-complete series-5 they had given 5 number in between that one blank so we have to identified wat is that number e.g – 12, 16,_, 20, 22 it was not so easy, and 5 ,and coding-decoding- 5 ques it was easy,one puzzle of sitting arrangement it was easy in that 6 person sat in a row in the face of east side in that it had given 4 information on basis of that we have to sat.

Third section- alphabet-5 ques,e.g what is the same alphabet on that word Confidence,1 data-Interpetion ,it was bar-graph on the basis of they had given 5 ques it was also easy,and last 5 ques I didn’t remember.

Fourth Section- it was fully English section, in that first 5 ques from grammar mistake,they had given 4 similar type of sentence and u have to find correct sentence,3 ques from antonyms and 4 ques 4m synonyms and last 3 ques was fill up we had to fill correct form of verb in that sentence

That’s all for the first part

Second part

It was 20 ques of c-apti and time duration was 15 min so in that section they had asked basic ques of c, so clear through basic concepts that sufficient , I hadn’t remember the ques but some ques was easy and some what was difficult………

Totally 307 student had sat for written and 119 got qualified written,out of 119 student 52 student are finally selected I was also lucky that my name was also in that

In interview it was fully HR ROUND

The ques asked 4m me was

i)Tell me abt urself?

ii)They had asked how you had joined this coll?

iii)Asked abt my native what is famous in ur native?

iv)My subject of intrest was oops so they had asked wat is oops with real time example?

v) They had asked data encapsulation of real time example?

vi)Do u have any relocation problem?

vii)Service bond for one and half year?

viii)Will you go for higher studies?

so mainly they had checked ur communication skill and confidence this is very important so be confident at the time….

Then defentely u will selected………….



ALL THE BEST

PRAVEEN KUMAR…..

HCL Placement Paper 10th October

HCL PAPER
PATTERN:

1. WRITTEN
2. TECHNICAL
3. HR

WRITTEN:

1. 35 Aps question
2. 20 Technical questions

Aps was almost logical and one or two sums on quants. (Prepare logical deduction, blood relation, seating arrangements, pbs on ages, percentage, time and work, time and distance)

Technical was based on C, C++, and some questions on networks, os, and ds.

Had section wise cut off and negative marking…



TECHNICAL:

1. Why HCL?
2. Questions on my area of interest.
3. Difference bet TCP/UDP—and which is better?
4. Whether tcp/udp is reliable?
5. Asked to choose any one like C, C++, Java. I said C++ So,
6. Num>>2(num value given and asked the o/p)
7. A prog and its o/p.
8. What is port..
9. Socket?
10. Where we use port..
11. Inheritance and its types
12. Polymorphism
13. If extern is used within private what will happen.
14. Types of networks.
15. Extranet?
16. Using static, extern keywords many questions were asked..

My technical round was abt half an hour. But I am not selected. So, I couldn’t give u HR questions..



BY,
Akash

GSSL Placement Paper - 2

1) YOU SHOULD LEARN POINTERS(they may ask in I.W)

2)****SHOULD LEARN C++(this is very very IMP,Based
on this only I got job.One more thing is
CLASS,INHERATENCI&POLYMORPHISM is sufficient)
3)YOU SHOULD PREPARE ONE FEM PROJECT AND TELL THEM
THAT AS YOUR OWN WORK(This will increase chance
to 99%)


WRITTEN TEST PATTERN
--------------------
1] C TEST 10Q 20MINUITS
2]F E M TEST 19Q 20MINUITS
3]APTITUDE TEST 15Q 20MINUITS
-----------------------------
F E M TEST
----------
1)WHO USED THE TERM FINITE ELEMENT FOR THE FIRST TIME?
a)
b)
c) CLOUGH

GSSL Latest Fresher Engineer Placement Sample Question Paper 1 2005

2)DERIVE THE JACOBIEN |J| FOR BEAM ELEMENT WITH STRAIN
ENERGY?
(ANS:PROMLEM IS NOT CORRECT PLEASE DO NOT ATTEMPT)
3)FOR AN ELEMENT SIGMA Ni=1,WHICH TYPE OF ELEMENT IT IS?
a)
b)NATURAL CO-ORDINATE
(ANS 100% CORRECT)
4)TIMOSHENKO BEAM ELEMENT THEORY TO CONSIDER -- - - -?
a)
b)
c)SHEAR DEFORMATION
5)SHEAR LOCKING - - - - ?
(ANS IS VERY STIFF 'K')
6)MEMBRANE LOCKING
(ANS IS ARCH ELEMENT)
7)Ex(epsiolan x)=dU/dX,Ey=dV/dY,r(X,Y)=?(gama(x,y)=?)
(ANS IS dU/dY+dV/dX )
K=integral B(TRANSPOSE)*D*B FOR LARGE DEFORMATION
WHICH MATRIX WILL GET EFFECTED?
(ANS IS D matrix )100%correct
9)FOR PLANE STRAIN f(Ex,Ey,Ez,r(x,y) ) - - -
(ANS IS Ez=0)
10)SERENDIPITY ELEMENT IS
(ANS 8 NODED ELEMENT)
(The element which is having nodes only on boundary is
called SERENDIPITY element)
11)IF THE ROTATION OF ELEMENT AND THE DISPLACEMENT ABOUT
N-A IS SAME THEN THE ORDER OF CONTINUITY
(ANS IS C1)
12)FRONTAL THEORY IS APPLIED FOR
(Please refer any fem book)
13)MINDLINS THEORY IS APPLIED FOR
c) this is the answer(Both Co&C1problems)
14)X=SigmaNi*Xi,U=sigmaNi*Ui WHICH TYPE OF ELEMENT
(Refer book)
15)BEAM SUBJECTED TO UDL FIND THE MOMENTS AT THE
2 NODES
16)Integral B(Transpose)*sigma(here sigma means stress)*dV
REPRESENTS?
(ANS IS INTERNAL LOAD VECTOR)
17)Integral ET(epsiolan transpose)*sigma*dV
P=strain displacement vector
Q=stress-strain deformation
Find [K]
(ANS [K]=
T(p transpose)*[Q]*

)
1
19)


REMEMBER ORDER MAY NOT BE CORRECT


APTITUDE TEST

1)33 1/3 of 101 + 296 is
(ans 1200) check
2)0.625= ? (ans 27/40)
3)One ship goes along the stream direction 28 km and in opposite
direction 13 km in 5 hrs for each direction.What is the velocity
of stream?
(ans 1.5 kmph)
4)Cubic root of 3375=?
(ans 15)
5)2020201-565656=?
(ans 1454545)
6)CHAIRS PROBLEM
5 chairs=9 tables,12 tables = 7 stools likethat- - -
(ans is 80Rs)
7)One clock ringes 7 O'clock in 7 sec.In how many seconds it will
ring 10 O'clock.
(ans 10.5 sec)
8)One watch is showing 30 past 3 .What is the angle between minutes &
hours hand?
(ans 75 degrees)
9)The average of 4 consecutive even numbers is 27. What is the largest
number?
(ans 30)
10) 25 stations ,24 stations are inbetween- - - - -
how many tickets should be required.
(ans 25*24=600)PUZZLES TO PUZZLE YOU "S.DEVI"PROB 24
11)One ball was dropped from 8ft height and every time it goes half
of the height. How much distance it will travell before coming to
rest.
(ans 24 approximately)
12)Two trains are travelline at equilateral .Train A is travelling
in the direction of earths spin.Other train B is travelling in
opposite direction of earths spin.Which trains wheels will wear
first?and why?
(ans TRAIN B .Because of less centrifugal force.)


OK HARI 3 MORE QUES ARE THERE.I HOPE YOU CAN SOLVE EASILY.
NOW I have only 3 C ques. I am sendins them in immediate
mail. Any whey I will try to send remaining 7 C ques
before 20th.



C QUESTIONS:

WHAT IS THE OUT PUT FOR FOLLOWING PROGRAMMS
1)main()
{
char a[2];
*a[0]=7;
*a[1]=5;
printf("%d",&a[1]-a)
ANS:
ans may be 1.(illegal initialization)
2)
#include<stdio.h>
main(){
char a[]="hellow";
char *b="hellow";
char c[5]="hellow";
printf("%s %s %s ",a,b,c);
printf(" ",sizeof(a),sizeof(b),sizeof(c));
}
(ans is hellow,hellow,hellow
6,2,5 )
3)
#include<stdio.h>
main()

float value=10.00;
printf("%g %0.2g %0.4g %f",value,value,value,value)
}
(ans is 10,10,10,10.000000)
4)
#include<stdio.h>
void function1;
int i-value=100;
main()
{
i-value=50;
function1;
printf("i-value in the function=",i-value);
printf("i-value after the function=",i-value);
}
printf("i-value at the end of main=",i-value);
functioni()
i-value=25;


THIS IS ROUGH IDEA OF THE PROGRAM
ANS ARE
1)i-value in the function=25;
2)i-value after the function=50;
3)i-value at the end of the main=100;

5)
main()
{
funct(int n);
{
switch(n)
case1:
m=2;
break;
case2:
m=5;
break;
case3:
m=7;
break;
default:
m=0;
}
THIS IS ROUGH IDEA:
(ANS:Out put is m=0)

REMAINING 5 PROGRAMS SOME WHAT LARGE AND COMPLICATED.

GSSL Placement Paper

SECTION 1- APTITUDE SECTION
Directions for questions 1-3: Complete the sequence given below
1. 5, 5, 13, 13, 21, 21, __
Ans: 29

2. 0, 7, 26, 63, 124, __

Ans: 215 ( hint: n3-1 )

3. 1, 3, 5, 7, __
Ans: 9

4. If a person walks at 4/5th of his usual speed he reaches 40min late. If he walks at his usual speed for how much time does he travel ?

5. Two trains A&B start at opposite points 120km apart at 60kmph. A fly starting along with train A at 120kmph reaches B then returns back to touch A and continues the two and fro movement. By the time two trains meet how much distance would the fly have travelled?

6. In a class 80% have passed in english, 70% passed Hindi, 10% didn't pass either. If 144 students passed both the subjects. What is the total strength of the class?

7. Find the least number which when divided by 7 gives the reminder 6, when divided by 6 gives reminder 5, when divided by 5 gives reminder 4 and so on ?

8. If a man stands in front of sun what is the first letter of the direction which is left to him ?

9. (a)A square is to circle as cube is to
(b)Success is to failure as joy is to

10. (a)Give the synonyms of the following words
(i) Joy
(ii) Inert
(iii) Jolly

(b) Give the opposites of the following words
(i) genuine
(ii) command
(iii) essential

11.Find the odd man out in the following sets
(i) Tiger, Elephant, King Cobra, Dolphin
(ii) Oasis, Lake, Pool, Valcano
(iii) Bengali, Karnataka, Mumbai, Kashmir
(iv) Lapidary, Lancet, Scapel, Surgeon
(v) Requiem, Dirge, Elegy, Paean

12. I bought a cycle 2days before my birthday and I broke it 3 days after my birthday. The day I broke it is Mar2,1956?

Directions: The following questions are to be answered on the basis of the above given statement
i) When is my birthday?
Hint: Keep in mind that 1956 was a leap year.
(ii) What is my age on Mar 4th, 1980?
(iii) My nephew is born exactly 20years after me. If I turned 20 in 1960, what is the nephews age on Feb 28th 1988 ?

13. Monday Aug25, 96 :
Hostess: "Mr A, you forgot your umbrella during the party on last friday. I expected you to collect it on your visit on wednesday as I plan to leave on this Friday."
Directions: The following questions are to be answered on the basis of the above given statement
(i) when A missed umbrella?
(ii)When A is supposed to collect it?
(iii)When K leaves?

14.What is my father's sons son to my son?

Ans. Cousin brother

15. On cutting a solid parabola what would be generated

Ans: Cone

16. What is Eulers formula?

Ans: F+V-E =2; where
F => faces; V => vertices; E => number of edges

17. What is Newton Raphson method used for?

Ans: To find the root of f(x) = 0;

18. How many tangents can be drawn on three circles if they don't lie within each other ?

19. xy - x + 2y = 6 equation is shifted to form equation xy=c what is c ?

20.When x is real what is the least value of (x2-6x+5)/(x2+2x+1)

21.When an object like cube or sphere is seen along x, y, z axis we get the same.Apart from these suggest another object which has similar characteristics as that mentioned above?
Ans: Triangular prism

22. When an object is seen from the front side we can see two concentric squares and top view also without any hidden lines. Draw the side view.

23. In common parlance, A=> B means what
Ans: if A is true B has to be true

23. If A is not invertible and BA = I is not possible, what is implied by this?
Ans: Determinant is Zero.

24. What is a free body diagram used for

25. A die is thrown twice what is the probability that you get same number


26. The sum of two numbers is 55. What is the larger number?



SECTION 2-TECHNICAL SECTION


1. Convert 251 in base 10 to octal(base 8)?

2. How much information can be stored in 1 byte of a IBM pc compatible?

3.What is the language used for Artificial Intelligence
Ans: lisp

4. Swap two variables without using temporary variable
Ans: a= a+b; b= a-b; a= a-b:

5.Which is not the operating system ?
Ans: BIOS

6. What is the optimum number of operations for 2x3 + 3x2 + 5x + 5?

7. In the fortran language which of the following is true.
(i) fortran uses call by value
(ii) fortran is object oriented
(iii) fortran allows use of function overloading

Ans. (i)

8. When a program is compiled what does it produce?
Ans: Source code is converted to object code


9. What is the difference between function overloading and function overriding?

10. What is the character set used in JAVA 2.0 ?
Ans: Unicode

SECTION 3 - C TEST
1. What is the mistake in the following program segment ?

f()
{
int a;
void c;
f2(&c,&a);}
2. a=0;
b=(a=0)?2:3;

a) What will be the value of b and why ?
b) If in first statement a= 0 is replaced by a= -1, b = ?
c) If in second statement a=0 is replaced by a = -1, b=?

3. char *a[2];
int const *p;
int *const p;
struct new { int a;int b; *var[5] (struct new)}

Describe the statements in the above given construct ?

4. f()
{
int a=2;
f1(a++);
}
f1(int c)
{
printf("%d", c);
}
What is the value of c ?

5. f1()
{
f(3);
}
f(int t)
{
switch(t);
{
case 2: c=3;
case 3: c=4;
case 4: c=5;
case 5: c=6;
default: c=0;
}
What is the value of c?

6. What is the fallacy in the following program segment ?
int *f1()
{
int a=5;
return &a;
}
f()
int *b=f1()
int c=*b;
}

7. Give the C language equivalents of the following
a)Function returning an int pointer
b)Function pointer returning an int pointer
c)Function pointer returning an array of integers
d)Array of function pointer returning an array of integers
8. Find the fallacy in the following program segment?
int a;
short b;
b=a;

9. Define function ? Explain arguments in functions ?

10. How does C pass variables to a function ?

11. Explain the following program segment.
f(){
int *b;
*b=2;
}


12. Explain binary trees and their use ?

13. Draw the diagram showing the function stack, illustrating the variables that were pushed on the stack at the point when function f2 has been introduced .
type def struct
{ double x,double y} point; }
main( int argc, char *arg[3])
{ double a;
int b,c;
f1(a,b); }
f1(double x, int y)
{point p;
stack int n;
f2(p,x,y)
}
f2(point p, double angle)
{ int i,j,k,int max;
}

GlobalEdge Placement Paper 2

GlobalEdge Paper


main()
{ int arr[]={ 1,2,3,4 };
int *ptr ;;;;
ptr++ = arr;
printf("%d,%d",ptr[2],arr[2]);
return 0;
}
what is the output :

a> compile time error :multiple termination statements for pointer
b> lvalue required for ptr
c> prints 3 3
d> printd 4 3

ans b: lvalue required for ptr;



2>

main()
{
char s[10];
scanf ("%s",s);
printf(s);


}

what is the output if input is abcd :

a> prints abcd
b> compiler error
c> prints abcd and 6 junk characters
d> printd s

ans a: prints abcd.



3>

main()
{
char c = 255;
printf ("%d",c);
return 0;
}


what is the output

a> illegal character assignment
b> prints -1
c> prints 2
d> prints 255

ans b: prints -1.



4>
main()
{
int i;
for (i=7;i<=0;i--)
printf ("hello\n");

}


what is the output

a> prints hello 7 times
b> prints hello 8 times
c> prints hello once
d> prints nothing

ans b: prints nothing.

5>

main()
{
printf( printf ("world") );

}

a> prints world
b> prints printf ("world")
c> prints nothing
d> compiler error

ans d: compiler error.






computer concepts

1> A c source code file can be

a> compiled only
b> interpreted only
c> both compiled and interpreted
d> nothing

ans c : both compiled and interpreted



2> c programming approach is

a> Top down
b> bottom up
c> both topdown and bottom up
d> none of the above

ans a:top down approach

3> The access time is less for

a> hard disk
b> cache
c> registers
d> main memory

ans c:registers

4>resolving of external variables in a program is done at

a>complie time
b>run time
c>link time
4>load time


ans c: link time.


5> interrupts inform process about

a> events external to process asynchronously
b> events external to process synchronously
c> both a and b
d> events internal to a process

ans a: events external to process asynchronously




/* C question and answers


All questions are tested in Turbo C compiler and have not been
tested in gcc or (linux platform) */
----------------------------------------------------
1)
#include
main()
{
scanf("%d");
printf();
}
which of the following is correct?
a)compilation error
b)Run time error
c)No output
d)depends on the compiler

ans : a
---------------------------------------------------------
2)
#include
#define islower(c) ('a'<=(c) && (c)<='z')
#define toupper(c) (islower(c)?(c)-('a'-'A'):(c))

main()
{
char *p="i am fine";
while(*p)
printf("%c",toupper(*p++));
}
a)bcd
b)AFE
c)aFe
d)BCd

ans : b ( macro substitution 3 times)
----------------------------------------------------------
3)
#include
main()
{
200;
printf("tricky problem");
}
a)warning message
b)compilation error
c)run time error
d)none of these

ans : a
------------------------------------------------------------
4)which is the null statement?
a) ;
b) {}
c) '\0';
d)all of these

ans : a
------------------------------------------------------------
5)what is the correct prototype of printf function ?
a)printf(char *p,...);
b)printf(const *char *p,...);
c)printf(const char *p,...);
d)printf(const *char p,...);

ans : c
-----------------------------------------------------------

/* questions on computer concepts */

1)which of the following is not a system file?
a).sys
b).com
c).ini
d)none

ans : d
---------------------------------------------------------------
2)A magnetic tape is equivalent to which of the following structure?
a)Graphs
b)trees
c)Lists
d)Dictionaries

ans : c
------------------------------------------------------------
3)For a linked list implementation which searching technique is not
applicable?
a)linear search
b)none
c)quick sort
d)binary search

ans : d
----------------------------------------------------------------
4)Encryption and decryption is done in which layer?
a)DLL
b)Network layer
c)transport layer
d)presentation layer

ans : d
------------------------------------------------------------
5)which of the following is not performed by the OS?
a)cpu shceduling
b)memory management
c)Transaction
d)none

ans : c
-----------------------------------------------------------

GlobalEdge Placement Paper

GlobalEdge Sample Paper


1. What is the output of the following code ?

int main( )
{
for( ; ;);
printf("Hello\n");
return 0;
}

a. give compilation error
b. prints Hello infinite times
c. Runs in an infinite loop without printing anything.
d. prints Hello once.

Ans: c


2. Output of the code?
FUNC (int *p)
{
p = (int *)malloc(100);
printf("p:%x",p);
}

int main( )
{
int *ptr;
FUNC(ptr);
printf("Ptr:%x",ptr);
return 0;
}

a. Both printf statements prints same values.
b. Both print different values.
c. Gives compile time error.
d. Gives run time error.

Ans: b

3. Output of the code?
int main()
{
char a[] = "world";
printf("%d %d\n",strlen(a),sizeof(a));
return 0;
}

a. 5,5
b. 6,5
c. 5,6
d. 6,6

Ans: c

4. What is the output generated?

main()
{
char *s = "Hello";
printf("%s",1(s));
}

a. Hello
b. ello
c. e
d. none of these.

Ans: b


5. Interpret the given declaration

char ( * ( f ( ) ) [ ] )( )

a. f is a pointer to function returning char
b. f is a pointer to an array of function returning a char
c. Invalid declaration
d. f is a function returning pointer to array[] of pointer to function returning char.

Ans : d





1. A binary tree of height h, h > 0 has

a. at least h and atmost 2*h-1 elements in it.
b. at least 2^h and atmost (2^h)+1 elementz in it.
c. at least 2^h -1 and atmost h^2 elements in it.
d. at least h and atmost (2^h) - 1 elements in it.

Ans: d

2. Thrashing is

a. flooding of pages in the memory.
b. increase in removal of pages from memory.
c. increase in page faults leading to decrease in CPU utilization.
d. removal of unused pages from memory making space for new ones.

Ans: c

3. Recursive Descent parser is a type of

a. Bottom up parser.
b. Top Down parser.
c. None of these.
d. Bottom down parser.

Ans: b

4. alloca() allocates memory from

a. Heap.
b. Reserved memory.
c. Data segment.
d. Stack.

Ans: d

5. What is the octal equivalent of decimal (5468).

a. 12360.
b. 12560.
c. None of these.
d. 12650.

Ans : c




GloabalEdge Sample paper

1. main()
{ int i;
i=(2,3);
printf("%d",i);
}

a)2 b)3 c)Compiler error d)Syntax error.

ans : 3

2. main(){
char str[]="GESL";
printf("%d %d",sizeof(str),strlen(str));
}

a)5,5 b)4,4 c)5,4 d)4,5
ans: 5, 4

3. main(){ for(i=0;i++;i<100) printf("hello world\n"); }

a)100 times b)0 times c)Infinite loop d)None of the above.


ans: 0 times.

4. main(){ for(i=1;i++;i<100) printf("hello world\n"); }


a)100 times b)0 times c)Infinite loop d)None of the above.

ans: infinite loop

5. main(){ char c; scanf("%s",c); }


a)Compiler dependent b)unpredictable c)Compiler error d) scans the i/p.

ans: Compiler dependent.



6. main(){
int k=5;
for(++k<5 && k++/5 || ++k<8);
printf("%d\n",k);
}


a)5 b)6 c)7 d)8

ans: 7

7. main(){
int *ptr1,*ptr2;
ptr1=(int *)malloc(sizeof(int));
ptr2=func(20,10,ptr1);
printf("%d %d\n",*ptr1,*ptr2);
}

int *func(int a, int b, int *c)
{
int x=a+b;
*c=a-b;
return(&x);
}


a)Bug in the code. b)No Bugs prints correctly c)Error d) None of the above.

Ans: Bug in the code.

8). int main() {
int i = 10, j ;
if ( ( j = ~i ) < i )
printf ( "True" ) ;
else
printf ( "False" ) ;
}


a) True b) False c) Compiler Dependent d) None of the above.

ans : True


9. How many bytes are required to create a 3*3 matrix using double pointer
ans: 12

10. take int=4,float=8,char=1
main() {
FILE *fp;
printf("%d\n",sizeof(fp) );
}


a)2 b)4 c)Compiler dependent d)Error

Ans:4

11. main()
{
int a=10,20;
a^=b^=a^=b;
printf("%d\n %d\n",a,b);

a)a=20,b=10 b)a=10,b=20 c)Syntax error d)Unpredictable

Ans : a=20 b=10
12. main() {

int i=10;

switch(i) {
case 10: printf("Hello "); {
case 1 : printf("World ");
}
case 5: printf("Hello World ");
}
}



a) Hello b) Hello c) Hello World Hello World d) Syntax Error.

Ans : Hello World Hello World
13. main() {
char str1[]="Hello";
char str2[]="Hello";
if ( str1==str2 )
printf("True\n");
else
printf("False\n");
}
Ans: False.
a)True b)False c)Error d) Unpredictable.

15. main()
{
# include
int i = 10 ;
printf("%d\n", i/2 );

}
a)10 b)5 c)error d) warning.
ans : 5

16. #include
# pragma pack(2)

struct SIZE {
int i;
char ch ;
double db ;
} ;
main () {
printf ( "%d\n",sizeof(struct SIZE) );
}
a)12 b)14 c)16 d)8

Geometrics Placement Paper 2

I am sending mainly c paper and some questions.
also will send somethig.There are 15 c q's all are discriptive.

1)fallacy
f()
{
int a;
void c;f2(&c,&a);
2)a=0;
b=(a=0)?2:3;
a) What will be the value of b? why
b) If in 1st stmt a=0 is replaced by -1, b=?
c) If in second stmt a=0 is replaced by -1, b=?
3)char *a[2]
int const *p;
int *const p;
struct new { int a;int b; *var[5] (struct new)
4)f()
{
int a=2;
f1(a++);
}
f1(int c)
{
printf("%d", c);
}
c=?
5)f1()
{
f(3);}
f(int t)
{
switch(t);
{
case 2: c=3;
case 3: c=4;
case 4: c=5;
case 5: c=6;
default: c=0;}
value of c?
6)Fallacy
int *f1()
{
int a=5;
return &a;
}
f()
int *b=f1()
int c=*b;
}
7)a)Function returning an int pointer
b)Function ptr returning an int ptr
c)Function ptr returning an array of integers
d)array of function ptr returning an array of integers
(See Scham series book)
8)fallacy
int a;
short b;
b=a;
9)Define function ?Explain about arguments?
10)C passes By value or By reference?
11)Post processed code for
abc=1;
b=abc1; (1 or 2 blank lines are given)
strcpy(s,"abc");
z=abc;
12)difference between my-strcpy and strcpy ?check
13)f()
{
int *b;
*b=2;
}
14)Function which gives a pointer to a binary trees const an integer value
at each code, return function of all the nodes in binary tree.(Study)Check
15)Calling refernce draw the diagram of function stack illustrating the
variables in the -----then were pushed on the stack at the point when
function f2 has been introduced
type def struct

Geometrics Placement Papers

GEOMETRIC PAPER ON 22nd JULY

Hi to All,

Geometric Software recently conducted off-campus recruitment for 2007 Batch at their own campus.



The test pattern and paper was as follows:-

1) General Aptitude Test (15 Mins & 40 Questions)

# It contains 3-4 series question

# Round @ 8 verbal question which includes synonyms and to find d conclusion.

# And few other aptitude question.



This section is easy but the time is less and also there is negative marking of 0.25 so attempt only those question which u r sure about.



2) Technical Aptitude Test (30 Mins & 20 Question)

The question are not based on Technical but they r logical question still the name technical aptitude test.



The Questions are:-
1) If a King has 1000 Expensive wine bottles and the neighboring queen has planned to kill the king. She send one of her man and he mix the poison in 1 wine bottle. The man who mixed the poison is caught by the king’s army but they doesn’t know in which bottle the poison is mixed. The poison is so strong that even if it is diluted 1000000 still any one would die, also it takes 3 weeks for poison to react. The king has party after 5 weeks he decided to give the wine to his prisoners. How many minimum no of prisoners should be tested so that king will be able to keep the wine in d party without hesitation.

2) If one have 260 sets of instructions then how many bits would be required by the Microprocessor??

3) If a suitcase is thrown by a man from a boat into sea will the water level rise?

4) If a brick is subjected to two equal and exactly opposite force then wht will happen to brick?

5) For the given figure, by how many ways we could reach from left (extended ) line to right (extended )line. Each step should be closer to destination?

6) n:u:: m:__

7) Two question were on data sufficiency one was like this.

A sold 80% of his book in sale. He had two types of book hard book and soft book. He sold equal no of books. Hard books were sold for 3$ and soft books were for 1$. How many books did A have originally.

a) If total revenue from the sale is 32$.

b) after sale he is left with 2hard books and 3 soft books.

8) The above fig is square. In which 2 lines AB & AC are inscribed as shown. AB & AC are of 10cms. Find the area of the square.

9) A ball is thrown vertically upwards what will be the ball projectile motion (5 graphs r given we need to match it)

And some other questions.



The aptitude results were declared within 15-20 mins. The selected candidate are made to fill the form and one sheet was given which include 20 words we are required to form the sentences based on it. It’s quite easy whatever comes to mind just write.



2nd round is technical round (final round). In technical round I was asked on C, C++ & on CG for computers batch students.

1) If an image is given & we need to brighten it, we could read and write into image. How it could be done?

2) DOF of human arm

3) One figure was given, He asked me how will u clip so that only the area within the rectangle can be seen.

4) Write the if statement that will detect the point outside the polygon(point clipping)

5) In C, recursive function for factorial

6) WAP to swap the lower byte wid higher byte on integer.

7) WAP to print 321 to 123.

8) One program was given and o/p was asked?

int a(int n)

{ count++; }

void main()

{

int count=0;

while(a<10)

a(count)

return cout<< count;

}

9) pass by value and pass by reference

10) wht is function pointer

11) write the syntax for pointer of array

12) once the program is written wht r d internal steps that occur to convert it to executable code

13) what is macro

14) what is d diff between macro and fuctions

15) when loading takes place

16) what r diff features of C++ that r advantage over C

17) what is encapsulation

18) are encapsulation, datahiding, abstraction same

19) what are generic classes

20) what are d advantages of functions

21) int a=1000

int *b=&a;

cout<<*++a;

22) there are 8 ball bearings each of 10 grams but one piece is defective which is of 9 grams you hav analog weighing system (2 pans) how many trials are required to detect the defective bearing

23) two lines intersecting at a point are given with coordinates of both line given. Find out the coordinates of intersecting point

24) what are templates

ALL THE BEST
Rocky

Futuresoft Placement Paper

40 min - 30 Questions
Correct ans 3 marks
Wrong ans -1 mark

There were 3 or 4 different sets of questions

This is my version of questions( this is based on only a vague memory of mine and i would request any of the members

who attended the test and who remember, to contribute any correction or improvisation to the questions)

1.) S > AB|AS
A > a|aA
B > b
What is the grammar accepted by the above?

Ans-> aa*b

2.)Given a string STOCK and a stack of size 4.
Which of the following strings cannot be generated using this stack.
(a) TSOCK
(b) TOSKC
(c) STOCK
(d) TKOSC
(e) None of these

3.)Where are the following variables stored
Automatic
Global
Static
(a)Heap,Stack,Heap
(b)Stack,Heap,Heap
(c)Heap,Heap,Stack
(d)None of these

Ans-> (d)

4.) What is the greatest disadvantage of dynamic RAM over static RAM
Ans. capacitor needs to refresh every 2 ms.

5.) What happens when the CPU gets interrupted?
(a)Performs ISR immediately
(b)releases the memory and data bus for the interrupting process
(c)Finishes the current instruction and performs ISR
(d)gets halted

6.) The s/n id 3 dB and freq is 300hz.Find the capacity of the line.
(a)100
(b)150
(c)300
(d)200
(e) None of these

7.) How much infomation can be stored between fffh-f00h address space.
(a)1024 bytes
(b)2048 bytes
(c)4096 bytes
(d)None of these

Ans->(d)

8.)
void main()
{
int ari[] = {1,2,3,4,5};
char arc[] = {’a',’b',’c',’d',’e'};
printf(%d %d,&ari[4]-&ari[2],&arc[3]-&arc[0]);
}

Ans -> 2 3

9.) Find the POS form of the expression given below
_ _ _
X.Y.Z + X.Y.Z + X.( Y + Z )

10.) The binary equivalent of 3B7F is
Ans. 0011 1011 0111 1111

11.) A microprogram can be defines as to consist of
Ans. A primitive operation

12.) A drum rotates at 4000 rpm. What is its average access time.

13.) What range of integral values can be stored using 32 bits?

14.) e= | | <(e-e)> | then
(a.) It is ambigous
(b.) generates all the arithemetic expressions for addition,
subtraction and multiplication
(c) It is non inherently ambigous
(d) None of the above

15.) the sorting algorithm that requires maximum comparisons when in sorted order and minimum comparisons when in reverse

order?
(a.) straight insertion sort
(b.) binary insertion sort
(c.) heap sort
(d.) bubble sort

16.) A graph is represented as an adjacency list with n vertices and e edges What is its time complexity

17.) A variable in a function cannot be accessed outside the function, why? (think the question is like this)
(a.) garbage collection
(b.) because it exists in swap area of memory
(c.)it gets popped out of the stack

18.)How many addresses are possible with 512 64kb segments?

19.) A question on pages and pagetables, i think to find the wrong statement of the given
(a.) small pages implies large page tables
(b.) larger pages implies i/o operations efficiency
(don’t remember the rest of the options, though the answer lies there)

20.) A reference string was given and using LRU page replacement algorithm we were asked to find the state of the memory

during 3rd page fault, the memory size being 3 pages.

21.) A finite automaton was given and we were asked to find the expression that represented the language that could be

accepted by the finite automaton

22.) There was a question on networks given a set of data like 5 byte header for network layer and maximum data allowed 110

bytes similar data for 2 other layers
question was to find the actual number of bytes send if the data size was 110 bytes under conditions like no

separate acknowledgement frames required, etc.

23.) there was a program given on an array of unsigned integers and i think the answer was that the program was to find the

largest and second largest of the elements in an array.

24.) John and Jacob are assigned the tasks of writing main() and a function funct(X,Y )in Pascal. Where will there be

conflicts between the two?
(a.) the position of main and function
(b.) the type of function
(c.) the number of times the function is called
(d.) in the paramters (i’m not sure abt the options)

25.)there was question on why h/w translation was required for memory relocation? (pretty easy one, don’t remember the

options)

26.) to find the prefix of (a+b)*(c-d)

27.)
#include
void main()
{int i,x=4,sum=0;
int arr[6]=[1,2,3,4,5,6]
for (i=0;i<4;i++)
sum+ = func(arr);
printf("%d", sum);
}

func(int x)
{ int val,x;
val = 2;
return(x+ val++);
}
(there was another twist in the question about a static declaration in the function, though i cannot recollect) f
28.)With a 2 line x decoder and 2 line y decoder how many address lines could be decoded with two dimensional addressing?
(a.) 4
(b.) 16
(c.) 32
(d.) 64

********************
::Another version::

1.) Output of folowing C code

void main()
{
int i=4,j=5;
printf("%f",i/j);
}

(a) 0
(b) 0.8
(c) 1
(d) None of these

Ans-> (d)

2.) In which of the following postfix notations there is no confusion between unary and binary minus.
[note:I am not sure about the choices]

(a) a*b
(b) abc

3.) Output of folowing C code

void main()
{
int i=0,j=0;
int arr[4][4] = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16};
clrscr();
for (i=2;i>=0;i)
for(j=2;j>=0;j)
printf(%d , *(*(arr+j)+i));
getch();
}

(a)11 10 9 7 6 5 3 2 1
(b)11 7 3 10 6 2 9 5 1
(c)..
(d)None of these

Ans-> (b)

4.) If there is 4 jobs(j1,j2,j3,j4) and there deadlines
(2,4,2,4).Which
of the followinf sheduling is not possible.
(a)j1 j3 j2 j4
(b)j1 j2 j4 j3
(c)j1 j3 j4 j2
(d)j3 j1 j2 j4

5.) .4 process allocated 8000 bytes of memory according to best fit as follows:-
p1 - 2000
p2 - 2000
p3 - 2500
p4 - 1500
p1 and p4 is released.If a process p with 1000 bytes enter where will
it be paced
(a)After p1
(b)After p3
(c)Cannot be placed
(d).

Ans->(b)

6.) Heap with 10 bytes is present.Then which of the following series is possible 4 options of a series of malloc and free

funtions.Don’t remeber the choices but easy to get the answer.

7.).All combinational circuits can be implemented by
(a)Only NOR
(b)Only NAND
(c)Only XOR
(d)None of these

Ans-> (d)

8.) void main()
{ int a=10,b=11;
printf(%d,a+++b);
printf(%d,a+++b);
}

(a.) 22,23
(b.) 23,24
(c.) 21,22
(d.) none

Ans->(c)

FUTURESOFT-Placement Paper-2003

Campus - Velammal College of Engg.
These are the questions that i remember!

1.Some palindrome question.the answer was (c)

2.Capacity of line…ans was 900

3. Number of null pointers in any binary tree = n+1

4. print (Head(T))
Traverse(left(T))
print (Head(T))
Traverse(right(T)) - ans: none of the above

5. Boolean expn Evalvate

6. Common subexpn : - ans : a + e

7. LRU : 1, 2, 3.

8. Tr. Delay - 10000 bits ans. 10.01

9. Grammar of Number of shift / reduce operator : ans. 4

10. CPU scheduling 9,8 ?

11. S –> AB|AS
A –> a|aA
B –> b
What is the grammer accepted by the above?
Ans. aa*b

13. allocation ans: (ii) only

14. swapping : ans: reference only

15. Compiler - related Qn.

16. LAN frames - ? related Qn.

17. parameter passing (35,20)

18. sliding window protocol
- BUFFER SIZE large

19. kernel mode - deallocate resource

20. logic circuit
ans . Minimum OR = 3

20. Combinatorics related

21. priority scheduling

22. cobegin
begin x = y; x= x+1; y= x
begin x =y; z= z+1; y= z
coend

ans. Number of values possi = 2

23. 2 bits flip / 2 bits exchange

ans : the word with one ‘1′

24. any addr
K^+ v(a) + 2I - 2a

25. S –> AB|AS
A –> a|aA
B –> b
What is the grammer accepted by the above?
Ans. aa*b

How many address lines are needed to address a 64Kb segment with
each register storing upto 512 bytes.
Ans. 14 address lines

Form the POS form of the expression given below
_ _ _
X.Y.Z + X.Y.Z + X.( Y + Z )

22.In a computer system the ROM :
(a) contains boot software
(b) is permanent
(c) Both of the above
(d) None of the above
Ans. (c)

23. Find the output for the following C program
int array[4][4] = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16};
for (i=2;i<0;i--)
for (j=2;j<=0;j--)
printf("%d", arr[j]);

24. Find the output for the following C program
#include
void main()
{int i,x,sum=0;
int arr[6]=[1,2,3,4,5,6]
for (i=0;i<4;i++)
sum+ = func(arr);
printf("%d", sum);
}
func(int x)
{ int val,x;
val = 2;
return(x+ val++);
}

25. Given a string STOCK and a stack of size 4.
Which of the following strings cannot be generated using this stack.
(a) TSOCK
(b) TOSKC
(c) STOCK
(d) TKOSC
(e) None of these

26. What range of integral values can be stored using 32 bits?
17. If a layer 4 transfers data at the rate of 3000 bytes/sec. What will be the size of data block transferred by Layer 2

2. If there are n nodes and K edges in a graph then what is the order of traversing
Ans. O(n square)

23. A graph is represented as an adjacency list with n vertices and e edges
29. e= | | <(e)> |
What forms do the expressions created by the above definition fit in
Ans. All arithematic expressions
32. The s/n id 3 dB Find the capacity of the line.

FUTURESOFT-Placement Paper-24 Aug 2003,Cochin

40 min - 30 Questions
Correct ans 3 marks
Wrong ans -1 mark

There were 3 or 4 different sets of questions

This is my version of questions( this is based on only a vague memory of mine and i would request any of the members

who attended the test and who remember, to contribute any correction or improvisation to the questions)

1.) S –> AB|AS
A –> a|aA
B –> b
What is the grammar accepted by the above?

Ans-> aa*b

2.)Given a string STOCK and a stack of size 4.
Which of the following strings cannot be generated using this stack.
(a) TSOCK
(b) TOSKC
(c) STOCK
(d) TKOSC
(e) None of these

3.)Where are the following variables stored
Automatic
Global
Static
(a)Heap,Stack,Heap
(b)Stack,Heap,Heap
(c)Heap,Heap,Stack
(d)None of these

Ans-> (d)

4.) What is the greatest disadvantage of dynamic RAM over static RAM
Ans. capacitor needs to refresh every 2 ms.

5.) What happens when the CPU gets interrupted?
(a)Performs ISR immediately
(b)releases the memory and data bus for the interrupting process
(c)Finishes the current instruction and performs ISR
(d)gets halted

6.) The s/n id 3 dB and freq is 300hz.Find the capacity of the line.
(a)100
(b)150
(c)300
(d)200
(e) None of these

7.) How much infomation can be stored between fffh-f00h address space.
(a)1024 bytes
(b)2048 bytes
(c)4096 bytes
(d)None of these

Ans->(d)

8.)
void main()
{
int ari[] = {1,2,3,4,5};
char arc[] = {’a',’b',’c',’d',’e'};
printf(”%d %d”,&ari[4]-&ari[2],&arc[3]-&arc[0]);
}

Ans -> 2 3

9.) Find the POS form of the expression given below
_ _ _
X.Y.Z + X.Y.Z + X.( Y + Z )

10.) The binary equivalent of 3B7F is
Ans. 0011 1011 0111 1111

11.) A microprogram can be defines as to consist of
Ans. A primitive operation

12.) A drum rotates at 4000 rpm. What is its average access time.

13.) What range of integral values can be stored using 32 bits?

14.) e= | | <(e-e)> | then
(a.) It is ambigous
(b.) generates all the arithemetic expressions for addition,
subtraction and multiplication
(c) It is non inherently ambigous
(d) None of the above

15.) the sorting algorithm that requires maximum comparisons when in sorted order and minimum comparisons when in reverse

order?
(a.) straight insertion sort
(b.) binary insertion sort
(c.) heap sort
(d.) bubble sort

16.) A graph is represented as an adjacency list with n vertices and e edges What is its time complexity

17.) A variable in a function cannot be accessed outside the function, why? (think the question is like this)
(a.) garbage collection
(b.) because it exists in swap area of memory
(c.)it gets popped out of the stack

18.)How many addresses are possible with 512 64kb segments?

19.) A question on pages and pagetables, i think to find the wrong statement of the given
(a.) small pages implies large page tables
(b.) larger pages implies i/o operations efficiency
(don’t remember the rest of the options, though the answer lies there)

20.) A reference string was given and using LRU page replacement algorithm we were asked to find the state of the memory

during 3rd page fault, the memory size being 3 pages.

21.) A finite automaton was given and we were asked to find the expression that represented the language that could be

accepted by the finite automaton

22.) There was a question on networks given a set of data like 5 byte header for network layer and maximum data allowed 110

bytes similar data for 2 other layers
question was to find the actual number of bytes send if the data size was ——–bytes under conditions like no

separate acknowledgement frames required, etc.

23.) there was a program given on an array of unsigned integers and i think the answer was that the program was to find the

largest and second largest of the elements in an array.

24.) John and Jacob are assigned the tasks of writing main() and a function funct(X,Y )in Pascal. Where will there be

conflicts between the two?
(a.) the position of main and function
(b.) the type of function
(c.) the number of times the function is called
(d.) in the paramters (i’m not sure abt the options)

25.)there was question on why h/w translation was required for memory relocation? (pretty easy one, don’t remember the

options)

26.) to find the prefix of (a+b)*(c-d)

27.)
#include
void main()
{int i,x=4,sum=0;
int arr[6]=[1,2,3,4,5,6]
for (i=0;i<4;i++)
sum+ = func(arr);
printf("%d", sum);
}

func(int x)
{ int val,x;
val = 2;
return(x+ val++);
}
(there was another twist in the question about a static declaration in the function, though i cannot recollect) f
28.)With a 2 line x decoder and 2 line y decoder how many address lines could be decoded with two dimensional addressing?
(a.) 4
(b.) 16
(c.) 32
(d.) 64

********************
::Another version::

1.) Output of folowing C code

void main()
{
int i=4,j=5;
printf("%f",i/j);
}

(a) 0
(b) 0.8
(c) 1
(d) None of these

Ans-> (d)

2.) In which of the following postfix notations there is no confusion between unary and binary minus.
[note:I am not sure about the choices]

(a) a*b–
(b) a–bc

3.) Output of folowing C code

void main()
{
int i=0,j=0;
int arr[4][4] = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16};
clrscr();
for (i=2;i>=0;i–)
for(j=2;j>=0;j–)
printf(”%d “, *(*(arr+j)+i));
getch();
}

(a)11 10 9 7 6 5 3 2 1
(b)11 7 3 10 6 2 9 5 1
(c)..
(d)None of these

Ans-> (b)

4.) If there is 4 jobs(j1,j2,j3,j4) and there deadlines
(2,4,2,4).Which
of the followinf sheduling is not possible.
(a)j1 j3 j2 j4
(b)j1 j2 j4 j3
(c)j1 j3 j4 j2
(d)j3 j1 j2 j4

5.) .4 process allocated 8000 bytes of memory according to best fit as follows:-
p1 - 2000
p2 - 2000
p3 - 2500
p4 - 1500
p1 and p4 is released.If a process p with 1000 bytes enter where will
it be paced
(a)After p1
(b)After p3
(c)Cannot be placed
(d)…….

Ans->(b)

6.) Heap with 10 bytes is present.Then which of the following series is possible 4 options of a series of malloc and free

funtions.Don’t remeber the choices but easy to get the answer.

7.).All combinational circuits can be implemented by
(a)Only NOR
(b)Only NAND
(c)Only XOR
(d)None of these

Ans-> (d)

8.) void main()
{ int a=10,b=11;
printf(”%d”,a+++b);
printf(”%d”,a+++b);
}

(a.) 22,23
(b.) 23,24
(c.) 21,22
(d.) none

Ans->(c)